Furnace & AC repair in Creve Coeur, MO

A licensed HVAC pro who works in 63141 and 63146 will call you back — free.

What’s going on

Add your name and a phone number or email.

Service area: Houses, villas and condominiums within the City of Creve Coeur, from the Olive Boulevard corridor out to New Ballas and Mason roads.

Close to half of households heat with electricity

About 3,600 of Creve Coeur’s roughly 8,200 occupied homes use electric heat, against about 4,500 on natural gas. (Census ACS 2024)

The city permit names a county-licensed contractor

Creve Coeur lists furnace and AC equipment replacement among the jobs needing a city permit, installed by a St. Louis County licensed mechanical contractor. (City of Creve Coeur)

  1. 1

    Send the short form

    Include your unit number if you’re in a condo building. Under a minute, start to finish.

  2. 2

    One contractor follows up

    A single licensed HVAC company that serves Creve Coeur gets your request and calls. Hiring them is optional.

Creve Coeur, French for “heartbreak,” incorporated in 1949 and grew along Olive Boulevard between University City and the lake that gave it its name (Wikipedia). Today it mixes large-lot houses with condominium and apartment complexes, and that mix shapes what kind of heating and cooling you’re likely to have.

An unusually electric city for St. Louis County

Across most of the county, gas furnaces dominate. In Creve Coeur about 44% of households heat with electricity, and only about half of all homes are detached single-family houses; the rest are attached homes, condominiums and apartments. (Census ACS 2024)

  • Electric-resistance furnaces and strip heat are simple but expensive to run in a cold snap, which is why heat pumps come up so often here.
  • In stacked units, the air handler often lives in a hall closet and the condenser sits on a shared pad or roof, so access and building rules matter as much as the equipment.

Built later than its neighbors

The median Creve Coeur home dates to 1980, and construction kept going after 1990 instead of stalling. Roughly 1,900 homes have been added since 2000.

City of Creve Coeur homes by decade built, ACS 2020–2024 estimates
Decade builtHomes
Before 1950135
1950s567
1960s1,739
1970s2,026
1980s1,361
1990s1,060
2000s972
2010s961

The paperwork: a city building permit and a county trade permit

  • City side: furnace/AC replacement is on Creve Coeur’s permit-required list. Building Division, 300 N. New Ballas Rd., 314-872-2500. (City of Creve Coeur)
  • County side: the installer must hold a St. Louis County mechanical license, and on plan-reviewed projects the mechanical, electrical and plumbing permit applications go to the county, not the city (Creve Coeur permit instructions). For a straight swap, ask the Building Division whether a county permit is also required.
  • City fees are set at $7 per $1,000 of construction valuation with an $80 minimum, according to the city’s instructions sheet.
  • License check: St. Louis County posts its licensed mechanical contractor list.

If you share walls with your neighbors

Creve Coeur treats remodeling inside multi-story, multi-family buildings carefully: all of it needs a city building permit, because the fire-rated floors, ceilings and walls between units have to stay intact (City of Creve Coeur). Moving a duct or a refrigerant line through one of those assemblies is exactly the kind of change that triggers it.

Before a contractor quotes, find out what your association owns. In many buildings the unit owner is responsible for the equipment but the board controls the roof, pads and exterior penetrations.

Quick answers

Does replacing a furnace or AC in Creve Coeur need a city permit?

Yes. The Building Division’s list of work requiring a city permit includes furnace/AC equipment replacement, and specifies installation by a St. Louis County licensed mechanical contractor. Questions go to the Building Division at 314-872-2500. (City of Creve Coeur)

Why do I deal with both the city and St. Louis County?

Because the city requires furnace and AC replacements to be installed by a St. Louis County licensed mechanical contractor. On larger projects the city’s instructions also send mechanical, electrical and plumbing permit applications to the county, which gives them an entry number before the city issues its building permit (Creve Coeur permit instructions). For a simple swap, check with the Building Division whether a county permit is needed too.

I live in a condo. Does that change anything?

It can. The city requires a building permit for all remodeling inside multi-story, multi-family buildings so the one-hour fire separation between units isn’t compromised (City of Creve Coeur). Your association may also control where condensers and line sets can go, so check the bylaws before you approve a new location.

My place has an electric furnace. Is a heat pump the obvious upgrade?

Often it’s the first thing to price, since it heats with the same wiring and replaces the AC in one unit. Ameren Missouri supplies the power; see its HVAC efficiency page and check for current offers before you buy.

What’s the catch with the free callback?

There isn’t one for you. TrueLocalPro is a free referral service that doesn’t install or repair anything. The contractor who calls is independent, and you’d pay them directly if you hire them.

Sources

Facts on this page were checked against these sources on 2026-11-06. Prices and rebates change — confirm current details with the source or your contractor.

  1. U.S. Census ACS 2024 (5-yr) via Census Reporter — year built, heating fuel, structure, tenure; Creve Coeur, 63141, 63146
  2. Wikipedia — Creve Coeur, Missouri
  3. City of Creve Coeur Building Division — When a permit is needed
  4. City of Creve Coeur Building Division — Building permit instructions
  5. St. Louis County — Licensed mechanical contractors
  6. Ameren Missouri — Residential energy efficiency (HVAC)