A licensed HVAC pro who works in 63110 will call you back — free.
Service area: Shaw in south St. Louis, between I-44 and Tower Grove Park and from South Grand west to Tower Grove Avenue and the Missouri Botanical Garden.
Built two stories tall, in brick, by contract
Deed restrictions in the Tyler Place subdivision, the biggest piece of today's Shaw, fixed a common building line and allowed only two-story brick buildings. That is why so many furnaces here push air up a single tall stack of rooms. (City of St. Louis)
A protected district since 1985
Shaw became a Certified Local Historic District in 1985, so changes to a building's outward appearance are judged against written standards before they go ahead. (City of St. Louis)
1
Say what the system is doing
Leave a name plus a phone number or an email, and pick the closest problem. A word about your building (single house, two-family, four-family) saves a back-and-forth later.
2
A single local contractor reaches out
We forward it to one independent, City-licensed HVAC firm that takes jobs near the Garden. You owe nothing for the call and decide for yourself whether to book.
Shaw is a compact 0.6 square miles wedged between I-44, South Grand, Tower Grove Park and the Missouri Botanical Garden, home to 6,919 people in 2020 (Wikipedia). It takes its name from Henry Shaw, who founded the Garden, and most of its brick houses went up in a rush after the Grand Avenue Viaduct opened in 1889.
How Tyler Place filled up
Henry Shaw started platting his land in 1878 and built the ten houses of Shaw Place in the 1880s. In 1887 Mary Tyler sold her property to a developer, and the Tyler Place subdivision, bounded by Grand, Tower Grove Avenue, Shaw Avenue and Magnolia, became the largest part of the neighborhood. Building only took off once the viaduct opened: about 400 homes in the next decade and roughly 1,000 more in the ten years after (City of St. Louis). Later pockets such as Flora Place (1901), Magnolia Place (1916) and Gurney and Heger Courts (1922–23) rounded it out (Wikipedia).
For heating and cooling, that history means uniform two-story brick shells where central air was added decades after the house was finished.
Census tract 1172 at a glance
Tract 1172 covers the middle of Shaw (its edges don't match the neighborhood's exactly). Seven in ten predate 1940, close to four in ten units are in two- to four-family buildings, and gas is the dominant heating fuel.
Census tract 1172, St. Louis city, ACS 2020–2024 five-year estimates
Measure
Count
Share
Housing units built 1939 or earlier
1,960 of 2,701
73%
Built 2000–2009 (infill and rebuilds)
354
13%
Freestanding single-family houses
1,186
44%
Units in 2-, 3- or 4-unit buildings
1,024
38%
Occupied homes heated with utility gas
1,906 of 2,477
77%
Occupied homes heated with electricity
445
18%
Occupied homes lived in by the owner
1,313
53%
What Shaw's district rules reach, and what they leave alone
Covered: any construction, demolition or alteration of exterior architectural features, under the City's preservation ordinance. Where the standards and another City code disagree, the stricter one wins (Shaw district standards).
Not covered: ordinary maintenance or repair that doesn't change design, material or outward look. Servicing or replacing equipment in the same spot generally fits here.
Watch points for HVAC: replacement windows and door frames must be wood or color-finished aluminum, glass block is not allowed, and unpainted masonry stays unpainted. Through-wall sleeves, window-unit swaps and patched brick around a new line set all brush against those lines.
Who to ask: the Cultural Resources Office, (314) 657-3865, which also keeps the current district maps (City of St. Louis).
City Hall's part: license and mechanical permit
There is no Missouri-wide HVAC license, so inside city limits the Building Division sets the bar. Its mechanical permit, needed for furnaces, boilers, exhaust and ventilation work, goes only to City-licensed mechanical contractors, costs $25 per application plus work fees, and follows the 2018 International Mechanical Code adopted by Ordinance 70800. Decisions arrive within 10 business days, though most clear in one to three (City of St. Louis). A firm licensed only in St. Louis County has to get the City license before it can pull a Shaw permit.
Making a tall brick house heat and cool evenly
Second floor too warm in July: in a two-story house with retrofitted ducts, the upstairs returns are often too small. Ask the pro to measure airflow before quoting a bigger condenser.
Cold first floor in January: a basement furnace that short-cycles can leave the main floor chilly while the upstairs is fine. Thermostat placement and blower speed are cheap things to check first.
Two-family and four-family buildings: say which unit you're in and whether each flat has its own furnace, since many share a basement but not a system.
Electric heat in about one home in five: for those, a heat pump quote is worth getting. Ameren Missouri is the electric utility here; see its efficiency programs page for current offers.
Quick answers
Do the Shaw standards say where my condenser can sit?
The 1985 standards don't have a clause naming air conditioners. What they do say is that every alteration of exterior architectural features in the district falls under the City's historic preservation ordinance, while routine repair that leaves the design, material and appearance unchanged is exempt. A like-for-like condenser swap in the back yard is the easy case; anything new on a street-facing wall is worth a call to the Cultural Resources Office at (314) 657-3865 first. (Shaw district standards; City historic districts)
We want a ductless mini-split upstairs. Could the window or wall work be an issue?
Possibly. Shaw's standards limit new or replacement windows and door frames to wood or color-finished aluminum and bar glass block, and they say masonry that was never painted shouldn't be painted. Run the line-set route and any sleeve or patch past the contractor with those rules in mind, and keep it on a rear or side wall where you can. (Shaw district standards)
Who is allowed to pull the permit for a new furnace on my block?
A mechanical contractor licensed by the City of St. Louis itself. The Building Division issues mechanical permits for furnaces, boilers and ventilation only to firms holding its license and a trades account on the City's permit portal. Questions go to the Mechanical Section at (314) 622-3313. (City of St. Louis)
I'm behind on my Spire bill and it's December. Can they shut off the gas?
Missouri's Cold Weather Rule covers Nov. 1 to March 31 for utilities the Public Service Commission regulates. Since a 2025 law, heat can't be disconnected for nonpayment when the forecast calls for temperatures under 32°F within 72 hours. The PSC hotline is 1-800-392-4211. (KBIA)
Is there a fee for using TrueLocalPro?
No. We're a free referral service, not a contractor, and no one from TrueLocalPro comes to your house. If you hire the independent pro who calls, you pay that company directly.
Sources
Facts on this page were checked against these sources on 2026-11-07. Prices and rebates change — confirm current details with the source or your contractor.