Furnace & AC repair in Compton Heights, St. Louis, MO

A licensed HVAC pro who works in 63104 and 63118 will call you back — free.

What’s going on

Add your name and a phone number or email.

Service area: Compton Heights on the south side, from I-44 down to Shenandoah Avenue between Grand Boulevard and Nebraska Avenue, including Hawthorne and Longfellow Boulevards and Reservoir Park.

The district rules stop at the alley

Compton Hill's standards govern what can be seen from the street, and they define street as excluding alleys. Equipment tucked behind the house, out of sight from the front, faces far fewer questions. (Compton Hill standards)

One house per lot, by deed

Restrictions written in the late 1880s, and still in force, keep homes set back with space between them and bar commercial use and rental flats. Most jobs here are big single-family houses, not split-up buildings. (City of St. Louis)

  1. 1

    Fill in a few fields

    A name, a phone number or email address, and the closest match to what's wrong. If the house has more than one system, mention which floor is acting up.

  2. 2

    One pro gets in touch

    Your request goes to a single independent heating and cooling company licensed by the City. Talking with them is free, and you're under no obligation.

Compton Heights is a 0.28-square-mile pocket of large homes between I-44, Grand, Shenandoah and Nebraska, with 1,396 residents in 2020 and the 180-foot Compton Hill Water Tower on its northwest corner (Wikipedia). The whole neighborhood is a historic district, and a lot of its heating and cooling questions come down to what the neighbors can see from the sidewalk.

Pitzman's curving streets and the first deed restrictions in Missouri

Julius Pitzman laid out Compton Heights in 1888, partly to fix mistakes he felt he'd made at Vandeventer Place, using curved streets that cut down through traffic. The City calls its residential deed restrictions the first in Missouri: they keep each house in private family use and fix a common setback. Most building happened around the 1904 World's Fair, while the homes on Reservoir Square go back to the 1860s, and the district became a Certified Local Historic District in 1979 (City of St. Louis).

The grandest houses date to the late 1880s and early 1890s and were built mostly by well-off families of German descent (City of St. Louis). Wikipedia counts more than 200 homes in all (Wikipedia).

What the 1978 standards say, read for HVAC work

The Compton Hill standards were approved on November 5, 1978. They're short, and most of them concern building form, but several lines bear on outdoor equipment and the holes it needs (Compton Hill standards):

  • Scope: materials, color, form and character of structures, their appurtenances, satellite structures, drives and yards that are visible from the street. Alleys are excluded from the definition of street.
  • Ancillary structures: new ones must match the architectural style of the period the main house was built in, which is worth knowing before you build an enclosure or screen around a condenser.
  • Brick: surfaces that were never painted must stay unpainted, so patch work around a new line-set hole should match the masonry rather than be painted over.
  • Windows and storms: frames and storm windows must be wood or a color-finished material; mill-finish aluminum is out. That matters if a window unit or through-wall sleeve changes an opening.
  • Utility lines: new ones go underground where possible.
  • Repairs: ordinary maintenance that doesn't alter design, material, color or appearance isn't blocked by the standards.

Heating and cooling a big house from the 1890s

  • Count the systems. A house this size may have one plant for the lower floors and another for the top, or a boiler plus separate cooling. Say which one is failing when you request help.
  • Upper floors and attics: with tall ceilings and long duct runs, the third floor is usually the last to cool. Ask for airflow readings before anyone proposes a larger condenser.
  • Old flues: if a high-efficiency furnace or boiler means abandoning a masonry chimney flue, the water heater left on it may need a liner. Have the bidder address that in writing.
  • Elevation: the water tower stands here because this is high ground, which let the reservoir feed the city east of Grand by gravity (City of St. Louis).

The census tract around Compton Heights

Census tract 1174 holds Compton Heights but is much bigger, taking in apartment buildings and flats outside the historic district, so treat these as context, not a portrait of Hawthorne Boulevard.

Census tract 1174, St. Louis city, ACS 2020–2024 five-year estimates
MeasureCountShare
Units built 1939 or earlier1,537 of 2,09473%
Units built in the 1970s32315%
Freestanding single-family houses1,05450%
Occupied homes heated with utility gas1,176 of 1,93861%
Occupied homes heated with electricity65834%
Owner-occupied homes1,11357%

Permits, utilities and winter shutoff protection

  • Permit: furnace, boiler and ventilation installs need a City Building Division mechanical permit, issued only to City-licensed mechanical contractors. Missouri itself doesn't license the trade. Most applications are approved in one to three business days (City of St. Louis).
  • Utilities: Ameren Missouri for power and Spire for gas. Check Ameren's efficiency programs for current offers.
  • Cold Weather Rule: Nov. 1 through March 31, PSC-regulated utilities can't disconnect heat for nonpayment if the forecast shows sub-freezing temperatures in the next 72 hours (KBIA).

Quick answers

Can I put a new condenser on the alley side without historic review?

The Compton Hill standards apply to structures, appurtenances and yards that are visible from the street, and they say plainly that alleys don't count as streets. A unit seen only from the alley is outside that language. Corner lots and wide side yards are where it gets less clear, so confirm with the Cultural Resources Office at (314) 657-3865. (Compton Hill standards; City historic districts)

A heat pump means new electrical service. Does that wire have to be buried?

The standards say that, where possible, all new utility lines should run underground. Raise it early with the HVAC contractor and your electrician so the cost of trenching shows up in the bid instead of as a surprise. (Compton Hill standards)

Our house still runs on a boiler and radiators. How do people add cooling?

The usual paths are ductless mini-splits, small-duct high-velocity systems threaded through closets and attics, or a conventional air handler serving just the top floor. Each one puts something on the outside of the house, so plan its location with the street-visibility rule in mind and ask the bidder to show you where it goes.

Which permit does a furnace replacement need here?

A mechanical permit from the City of St. Louis Building Division, and only a City-licensed mechanical contractor can pull it. It's $25 to apply plus the work fees on the City's schedule; reach the Mechanical Section at (314) 622-3313. (City of St. Louis)

Do I pay TrueLocalPro anything?

No, the service is free. TrueLocalPro is a referral service, not an HVAC company. The pro who contacts you works independently, and you'd only pay them, and only if you hire them.

Sources

Facts on this page were checked against these sources on 2026-11-07. Prices and rebates change — confirm current details with the source or your contractor.

  1. Wikipedia: Compton Heights, St. Louis
  2. City of St. Louis: Compton Heights history overview
  3. City of St. Louis: Compton Hill Historic District
  4. City of St. Louis: Compton Hill rehabilitation and new construction standards (PDF)
  5. City of St. Louis: City historic districts
  6. U.S. Census ACS 2020–2024 (5-yr) via Census Reporter: tract 1174
  7. City of St. Louis Building Division: Mechanical Permits
  8. KBIA: Cold Weather Rule extended to 72 hours
  9. Ameren Missouri: efficiency programs