Furnace & AC repair in Skinker-DeBaliviere, St. Louis, MO

A licensed HVAC pro who works in 63112 and 63130 will call you back — free.

What’s going on

Add your name and a phone number or email.

Service area: Skinker-DeBaliviere between Delmar Boulevard and Forest Park, from DeBaliviere Avenue west to the city limit, including Parkview, the Catlin Tract and Washington Heights.

Visible from the street means design review

The district's standards judge a change by whether it can be seen from public sidewalks and streets, not from the alley or a neighbor's yard. Rooftop air conditioners, vents and piping belong on parts of the roof or lot that can't be seen (City of St. Louis standards, PDF).

Apartments outnumber houses

In the two census tracts covering most of the neighborhood, about 57% of homes are in buildings with five or more units, and roughly two in five occupied homes heat with electricity (Census ACS via Census Reporter).

  1. 1

    Send a quick request

    Choose the problem and leave a phone number or an email. If it's a condo or flat, say which unit.

  2. 2

    Hear back from one contractor

    A single independent, City-licensed HVAC company gets your details and contacts you. You decide whether to hire them.

Skinker-DeBaliviere filled in fast after the 1904 World's Fair: Parkview Place in 1905, Washington Heights in 1907, the Catlin Tract in 1909. Its 3,899 residents in 2020 live in a City historic district designated in 1978 (City of St. Louis; 2020 census data).

Twenty years of building, then a buried river

The district's houses and apartment blocks went up mostly between 1906 and 1925, which is why the streets look so consistent (City of St. Louis). The River Des Peres flooded badly in 1915; after a large containment project in 1929–31, the last vacant lots filled in (City of St. Louis).

Buildings from those years were designed around coal-fired boilers and radiators. Plenty still run on hot water or steam today, with cooling added later through window units, high-velocity ducts or mini-splits.

Reading the district standards before you install

  • What triggers review: within the district, any exterior alteration that needs a building permit must also be approved by the Cultural Resources Office or the Preservation Board.
  • How visibility is judged: from public streets and sidewalks only. Corner lots and houses with wide side yards have more of their property counted as visible, and their rear areas are decided case by case.
  • Rooftop equipment: roof-top air conditioners, vents and piping go on roof areas or parts of the lot that aren't visible.
  • Chimneys: visible chimneys stay at full height, even after a furnace or water heater stops using them.
  • Source: Skinker-DeBaliviere standards, revised by Ordinance 70821 (PDF).

Mostly pre-1940, mostly multi-unit

Two census tracts cover most of the neighborhood. Gas still leads, but electric heat is far more common here than in south-city bungalow areas, mainly in apartments with electric furnaces or baseboard.

Tracts 1051.98 and 1052 combined, ACS 2020–2024 five-year estimates via Census Reporter
MeasureEstimateShare
Housing units3,884—
Built 1939 or earlier2,18156%
In buildings of 5+ units2,21957%
Single-family detached1,00926%
Occupied homes heated by utility gas2,042 of 3,50558%
Occupied homes heated by electricity1,39040%
Occupied homes that are rented1,89754%

Still recovering from May 16, 2025

The EF3 tornado that afternoon clipped Forest Park and Skinker-DeBaliviere, causing widespread tree damage, before reaching EF2 strength again in DeBaliviere Place (Wikipedia). A year later, most of the big trees along Waterman Boulevard were gone and at least one condo building there was still being rebuilt (KCUR/KXCV).

Losing that shade means more afternoon sun on roofs and west walls, so an AC that coped before may now run longer. If your equipment sat under falling limbs or was moved during roof repairs, have it checked for refrigerant leaks and a level pad.

The permit is separate from historic approval

Design approval doesn't replace the mechanical permit. That comes from the City Building Division and can be pulled only by a contractor holding a City of St. Louis mechanical license; most are approved within one to three business days (City of St. Louis). Missouri has no statewide HVAC license, so a license from a town across the western city limit doesn't count here.

Quick answers

Can the new condenser sit in my side yard facing Pershing?

Maybe, but expect review. The standards place more of a property in the visible category on corners and lots with wide side yards, and favor equipment where the street can't see it. A rear spot off the alley is usually the easy answer. Ask the Cultural Resources Office before the pad is poured.

My new high-efficiency furnace vents out the side wall. Can I take down the old chimney?

Not if it's visible. The district standards say existing visible chimneys are to be kept at full height, and new vents and piping should go on non-visible parts of the building (City of St. Louis standards, PDF). Your installer can usually route the flue toward the rear.

Our condo building's rooftop units were damaged in the 2025 tornado. Who fixes them?

Shared rooftop equipment is normally the association's, under its insurance and declaration; the equipment serving only your unit may be yours. Check the bylaws, then have the board or manager arrange the inspection.

Would ductless mini-splits work in a 1910s flat with radiators?

Often, yes. They add cooling without new ductwork. In this district, keep outdoor units and refrigerant lines off the street-facing walls so the install doesn't run into design review.

Will TrueLocalPro bill me for the callback?

Nothing. TrueLocalPro passes your request to one independent contractor and doesn't do the work. You pay that company only if you hire it.

Sources

Facts on this page were checked against these sources on 2026-11-07. Prices and rebates change — confirm current details with the source or your contractor.

  1. City of St. Louis: Skinker DeBaliviere overview
  2. City of St. Louis: Skinker-DeBaliviere-Catlin Tract-Parkview Historic District
  3. City of St. Louis: Skinker-DeBaliviere Historic District Standards (PDF)
  4. City of St. Louis: Skinker DeBaliviere 2020 census data
  5. U.S. Census ACS 2020–2024 via Census Reporter: tracts 1051.98 and 1052
  6. Wikipedia: 2025 St. Louis tornado
  7. KXCV/KCUR: life after the tornado (May 14, 2026)
  8. City of St. Louis Building Division: Mechanical Permits